MP 8000 ( 3 Para )

Standard configuration

ECG, NIBP, SPO2
8.4” Color TFT Display
Suitable for adult pediatric and neonatal patient
Basic parameters (ECG, SPO2, NIBP) in a durable case for bedside monitoring and transport monitoring
Audible and visual alarms with adjustable alarm ranges
Networkable with CONTEC central monitoring system
Powerful data management and storage capacity

NIBP

Method oscillometery

Operation models manual / automatic / STAT

Measurement unit mmHg / KPa selectable

Measurement types systolic, diastolic, mean

Over pressure protection YES

ECG

Lead type 5-lead

Input RA; LA; LL; V

Sweep Speed 12.5mm/s, 25mm/s, 50mm/s

Accuracy ± 1 bpm or ± 1%, which is greater

Protection withstand 4000 VAC/50 Hz Voltage in isolation against electrosurgical and defibrillation

S-T detection YES, Arrhythmia analysis YES

Alarm YES, audible and visual alarm,

Alarm events recallable

Optional

RESP, 2-TEMP, 2-IBP, ETCO2, Network,

Thermal Printer, Pace Maker

• NIBP
  
  Method oscillometery
  Operation models manual / automatic / STAT
  Measurement unit mmHg / KPa selectable
  Measurement types systolic, diastolic, mean
  Over pressure protection YES

ECG:

Lead Mode: 3-lead OR 5-lead
Lead Selection: I, II, III, avR, avL, avF, v
Heart rate range: Adult: 15-300bpm, pediatric/Neonatel: 15-300bpm
ECG waveform: 2 channals
Accuracy:±1 bpm or±1%, Whichever is greater
S-T segment detection: Measurement rang:0.2mv~2.0mv

Specification

Alarm: Yes audible and visual alarm, alarm events review
High resolution 12.1” color TFT display
Lightweight, compact and portable
ECG, SPO2, NIBP, RESP, 2- TEMP, PR
Built- in rechargeable lithium battery
ECG waveforms of 7-leads display on the same screen
72-hours graphic and tabular trends of all parmeters
72 alarm events of all parameters recall
32 seconds full-disclosure waveform review
500 NIBP measurement data can be storage and recall
Data and waveforms color be adjustable
Arrhythmia analysis and S-T segment analysis
Suitable for abult, pediatric and neonatal patient

• NIBP
  
  Method oscillometery
  Operation models manual / automatic / STAT
  Measurement unit mmHg / KPa selectable
  Measurement types systolic, diastolic, mean
  Over pressure protection YES

ECG

Lead type 5-lead
Input RA; LA; LL; V
Sweep Speed 12.5mm/s, 25mm/s, 50mm/s
Accuracy ± 1 bpm or ± 1%, which is greater
Protection withstand 4000 VAC/50 Hz Voltage in isolation  against electrosurgical and defibrillation
S-T detection YES, Arrhythmia analysis YES
Alarm YES, audible and visual alarm,
Alarm events recallable

• High resolution 12.1” color TFT display
• Lightweight, compact and portable
• ECG, SPO2, NIBP, RESP, 2-TEMP PR
• Optional  2-IBP, ETCO2, and thermal printer
• Built-in rechargeable lithium battery
• ECG waveforms of 7-leads display on the same screen
• 72 hours graphic and tabular trends of all parameters
• 72 alarm events of all parameters recall
• 32 second full disclosure waveform review
• 500 NIBP measurement data can be storage and recall
• Data and waveforms color be  adjustable
• Arrhythmia analysis and S-T segment analysis
• Suitable for adult, pediatric and neonatal patient
• 
  SPO2
  
  Measurement range 0-100%
  Accuracy ± 2 digit (70 – 100% ); 0-69% unspecified

Pulse Rate

• Range:20-254pm
• Accuracy: ±3bpm

Respiration

• Method: RA-LL impedance
• Range: Adult: 0120rpm;pediatric/neonatal: 0-15rpm
• Apnea alarm: yes

Temperature

• Range: 0-50 °C
• Accuracy :± 0.1 °C
• Channel : Dual – channel