Manufacturer and Supplier of Oxygen Concentrator

 
Oxygen Concentrator

An oxygen concentrator is a device used to provide oxygen therapy to a patient at substantially higher concentrations than available in ambient air. They are used as a safer, less expensive and more convenient alternative to tanks of compressed oxygen. The oxygen concentrator can set using time from 1min to 99min. So when you set the time at 60 min, it will cut off automatically after one hour. Our oxygen concentrator also has alarm when the power is off. So it will be safer for a patient to use.

An oxygen concentrator is capable of continuous delivery of oxygen. It has two cylinders, each filled with a zeolite material which selectively adsorbs the nitrogen in the air. In each cycle, air flows through one cylinder at a pressure of around 20 psig, where psig indicates the gauge pressure where the nitrogen molecules are captured by the zeolite, while the other cylinder is vented off to ambient atmospheric pressure allowing the captured nitrogen to dissipate.

Oxycure 240 A | Oxygen Concentrator
Enquire for Medical Equipments
Oxycure 340 A | Oxygen Concentrator
 
Oxycure 240 A | Oxygen Concentrator
Oxygen Concentrator, Oxygen Concentrator Manufacturer
Main material molecular sieve
Technical data

Power Supply AC220V±22V, 50Hz±1Hz
Input Power 600VA
Oxygen flow 1~5L/min
Oxygen concentration =93%
Nebulizing rate =0.2ml/min
Output Pressure 0.04Mpa-0.05Mpa
Noise =52dB(A)

Imported molecular sieve originally from U.S.A The key component to apart Oxygen, its function is to draw oxygen from air sent by compressor.

Intelligent control system with micro-computer pressure-control program set alarm function in case higher or lower pressure than limitation.

large LCD Screen showing 8 digit display to calculate time. High Oxygen concentration, low noise Oxygen concentration is 93%, multiple noise reducer of impedance, noise is lower than 52db(A).

Automatic alarm system when power off Compressor Supply the air source for the whole machine, continual operation life-time is more than 15000 hours without stop.

Flow adjustment

Adjustable flow and continual oxygen supply, operate it whenever you wish to make oxygen.

Great temperature and environment characteristic Could work under the environment 0~40°C, 0~4km higher than altitude, average concentration is higher than 93%.

Great cooling and ventilation system valve pass test exchanging air for 50 million times.

Absorption tower

Made by the specialized aluminum material.

The Principles

( Convenient solution of heavy oxygen cylinders ) It separates oxygen & nitrogen in air at the same time filter the bad substance in air so as to get pure oxygen for health care & therapy care (for families & medical house) It can produce oxygen continuously, efficient and safe. ( pollution free )
" Easy to operate, it can produce oxygen continuously where there is air and electricity.
" Low cost, without any expendables, spends only 0.3 degrees electricity per hour.
" Max. flow rate 5 liter/min.

 
Oxycure 340 A | Oxygen Concentrator
Portable Oxygen Concentrator, Oxygen Concentrator Supplier India

Imported molecular sieve originally from U.S.A The key component to apart Oxygen, its function is to draw oxygen from air sent by compressor.

Intelligent control system with micro-computer pressure-control program set alarm function in case higher or lower pressure than limitation.

large LCD Screen showing 8 digit display to calculate time. High Oxygen concentration, low noise Oxygen concentration is 93%, multiple noise reducer of impedance, noise is lower than52db(A).

Automatic alarm system when power off Compressor Supply the air source for the whole machine, continual operation life-time is more than 15000 hours without stop.

Flow adjustment

Adjustable flow and continuous oxygen supply, operate it whenever you wish to make oxygen.

Great temperature and environment characteristic Could work under the environment 0~40°C, 0~4km higher than altitude, average concentration is higher than 93%.

Great cooling and ventilation system valve pass test exchanging air for 50 million times.

Absorption tower

Made by the specialized aluminum material. It is made for hospital purpose.
2 outlets for 2 patients.

The Principles

( Convenient solution of heavy oxygen cylinders ) It separates oxygen & nitrogen in air at the same time filter the bad substance in air so as to get pure oxygen for health care & therapy care (for families & medical house) It can produce oxygen continuously, efficient and safe. ( pollution free )
" Easy to operate, it can produce oxygen continuously where there is air and electricity.
" Low cost, without any expendables, spends only 0.3 degrees electricity per hour.
" Max. flow rate 5 liter/min.

Main material molecular sieve
Technical data

Power Supply AC220V±22V, 50Hz±1Hz
Input Power 600VA
Oxygen flow 1~5L/min
Oxygen concentration =93%
Nebulizing rate =0.2ml/min
Output Pressure 0.04Mpa-0.05Mpa
Noise =60dB(A)